VL-40S Fabric Frame Series

VL-40S Fabric Frame Series

from 139.99

VL-40S single sided graphic frame with a solid outside finish has a profile width of 40mm. It is rigid because it’s backside has a longer metal edge for reinforcement, making it especially great for wall mounting and hanging overhead. Plus, it is lightweight; however, for widths longer than 4ft., it is not recommended to be used as a free-standing display without a support because of its thin profile width. When installing the fabric graphic, the keder can fit 12mm deep and 3mm wide into the keder trough. Not compatible with lights (cannot be backlit.)

Package Includes:

  • (1) 4-Sided Frame

  • (1) Custom Single-Sided Graphic (with hem)

  • (4) VL Triangle Corner Connectors, (16) Socket Screws, (1) 3mm Allen Wrench

  • (5) VL Split Connectors (1 pre-installed on 1 VL-40C), (1) Torx Key

  • (2) VL Key Locks (pre-installed), (1) 4mm Allen Wrench

  • (2) VL-40C Support Extrusions

Tool-free corner connectors are available (4) : $100 - Please make a separate request.

Suggested Uses: Retail Stores, Restaurants, Art Galleries, Grand Openings, Trade Shows, Offices, Showrooms, Backdrop, Photo-ops, Step & Repeat, Partition Wall, Etc.
Material: Fabric
Print Process: Full Color Dye Sublimation
Hardware Setup: To make one edge of the frame, take two cut VL-40S extrusions and, between, add Split Connector; tighten. Repeat this three times. Take two completed 10’ edges and slide in Corner Connector; tighten. Repeat this three times. Connect VL-40C to the other; tighten. Vertically insert ends of completed VL-40C into top and bottom of the frame; tighten.

Upgrade to Replace: VL Toolless Corner Connector and VL Toolless Split Connector.

Graphic Installation: Transversely, push corners of graphic into the frame’s recessed groove. Then, starting midway on the frame going toward the corners, continue pushing in the straight edges of the graphic on all four sides.

Accessories (sold separately): Wall Mounts, Ceiling Eye Hooks, Steel Base, Whistler Feet, Yeti Feet.

Warranty: Lifetime on frame; one (1) year on graphics
Frame Size: 120"W x 120"H x 1.57"D
Artwork Size: 122"W x 122"H

Model Depth:
Add To Cart